Liter is what.  Each building, extension and structure is assigned a letter.  Letters to be affixed in the technical passport for non-residential premises and buildings

Liter is what. Each building, extension and structure is assigned a letter. Letters to be affixed in the technical passport for non-residential premises and buildings

Granting the right to free or preferential travel on railway or on some other means of transport (usually having a special letter designation)

Explanatory Dictionary of Efremova. T. F. Efremova. 2000 .


See what "Liter and Litera" is in other dictionaries:

    Litera- Letter: a leg; b embossed letter; bingo; g size; d thickness; e signature; g growth (constant for all letters). LITERA [from the Latin lit (t) era letter], a rectangular bar made of printing alloy, wood or plastic with embossed (convex) ... ... Illustrated Encyclopedic Dictionary

    The burial place of many writers, public figures, scientists at the Volkov cemetery in St. Petersburg. They arose in 1861, when N. A. Dobrolyubov was buried next to the grave of V. G. Belinsky. I. S. Turgenev, M. E. Saltykov are buried here ... ... Big Encyclopedic Dictionary

    LITER, letter, husband. (colloquial). Same as letter. Explanatory Dictionary of Ushakov. D.N. Ushakov. 1935 1940 ... Explanatory Dictionary of Ushakov

    letter- (Letter, Sorts) In a metal set: a bar made of typographical alloy, plastic or wood, having a convex image of a sign on one of the ends (a point [an imprint of a letter on paper, an image of a letter]). The distance between the front and rear ... ... Font terminology

    letter- letter, pl. letters, genus lit. The pronunciation of [litera] is obsolete... Dictionary of pronunciation and stress difficulties in modern Russian

    - [from lat. lit(t)era letter] a rectangular bar made of typography, alloy, wood or plastic with a relief (convex) image (point) of a letter, number or sign on one of its ends (see Fig.). It is used as a printing element for manual or ... ... Big encyclopedic polytechnic dictionary

    s; and. [lat. littera] 1. Obsolete. Letter. Write in large letters. Designate places with letters. 2. Typography A metal (rarely wooden or plastic) bar with a reverse convex image of a letter or other sign, used in ... ... encyclopedic Dictionary

    I 1. A metal bar made of a printing alloy with a relief (convex) image (point) of a letter or sign at the end. 2. Alphabet element; letter. II well. obsolete see liter Explanatory Dictionary of Efremova. T. F. Efremova. 2000... Modern dictionary Russian language Efremova

    letter- s; and. (lat. littera) see also. letter 1) outdated. Letter. Write in large letters. Designate places with letters. 2) printing. A metal (rarely wooden or plastic) bar with a reverse convex image of a letter or other sign, ... ... Dictionary of many expressions

Books

  • Control and measuring materials. Russian language, lit. reading, mathematics, the world around. 1st grade, Gudym Elena Yurievna, Shestakova Olga Valentinovna, Plahuta Elena Mikhailovna. We bring to your attention tutorial with control and measuring materials for class 1. It will help you assess the level of knowledge of first-graders in the middle and at the end of the school year. AT…

Lesson №5,6

Topic. Inspection and preparation of accounting and technical documentation for a land plot for the formation of an inventory file.

An inventory survey is subject to a built-up land plot allocated for the placement of a building with services, structures and structures intended to serve this building, and isolated in legal, territorial and economic terms from adjacent plots by certain boundaries.

For shooting land plot the available graphic plans of the territories, materials of geodetic surveys should be used to the maximum.

In the process of surveying the territory should be:

  1. all buildings, structures, supports, wells, green spaces and other ground situations have been removed;
  2. established physical and compared normative boundaries of individual built-up land plots;
  3. measured the length of the boundaries of the site and its individual parts (land, paving, etc.);
  4. the address and owner of the main structure were identified;
  5. the purpose of the object (hospital, school, residential building, etc.), the material and the number of storeys of the main building have been established;
  6. a survey description and determination of the wear and tear of service buildings and outbuildings was made.

When measuring in kind, an outline of the land plot is drawn up with the application of all existing buildings, structures and boundaries of types of land (yard, garden, vegetable garden, green spaces, etc.)

The outline indicates the number of the household, the building, the name of the street, the name of the owner, the dates of the beginning and end of the shooting, control and signature of the performers. A sloppy outline that is difficult to read is considered defective. The same applies to an outline that has gaps. If an incorrect size inscription is made on the outline, then it should not be erased. It is crossed out, and the correct number is written on top. Redrawing the outline, erasing and writing some numbers over others are prohibited.

When drawing the main buildings, the outline shows their number of storeys, wall material, purpose.

The outline is the main material for drawing the plan and must be prepared so that another performer can easily draw up a plan of the land plot using it.

All site boundaries are measured along their entire length, and in the case when the boundaries are built up and it is not possible to carry out work in the usual way, it is necessary to measure in parts or parallel to the boundary. The measurement of the site is carried out along the center lines of the fences located between the sites, and along the outer side of the fences overlooking the streets, driveways, squares, etc. In the absence of landmarks, the boundary is set conditionally (which is recorded in the outline).

All buildings of a permanent type connected to the ground by foundations or pillars are measured and entered into the outline, namely:

  • main buildings and extensions to them;
  • buildings official purpose: barns, stables, sheds, cellars, etc.;
  • structures: fences, fences, wells, garbage pits, sidewalks, paving, fountains, etc.

Buildings and structures must be measured along their perimeter along the base to calculate the built-up area and above the base, along the body of the walls, to calculate their area.

The area under the building, located on poles, as well as the driveways under it, are included in the built-up area.

The protruding parts of the walls (pilasters) up to 10 cm thick and up to 1 m wide are not measured and are not applied to the outline. All other protrusions in buildings are measured, plotted on the outline and included in the built-up area.

When measuring a building along the perimeter, it is necessary to select its individual parts, depending on the purpose, wall material and heights. The dimensions on the plan should be marked in such a way that during the assessment there are no difficulties in determining the construction volume of the building and its parts.

Each building, extension and structure is assigned a letter.

Litera - letter designation of buildings, structures and structures in the inventory and technical documentation.

Main buildings are written in capital letters of the Russian alphabet A, B, C, etc. (except for the use of the letter G, intended for service buildings and structures).

Structure- a separately constructed building, a house consisting of one or more parts, as a whole, as well as service buildings.

Signs of the unity of the building are:

  • foundation and common wall with communication between parts, regardless of the purpose of the latter and their material;
  • in the absence of communication between the parts of one building, a sign of unity can be the general purpose of the building, the uniformity of the material of the walls, common staircases, a single architectural solution.

main structure a building is called, which, among others on a land plot, is dominant in terms of capital construction, architectural features and purpose. One or more buildings can be on one land plot.

Official a structure is called, which in relation to the main building is of secondary importance on the land. Service buildings are often of a non-capital type and during a technical inventory of their interior spaces not measured or taken into account. Outbuildings include sheds, garages (individual use), sheds, yard cellars, etc.

Outbuildings, basement, basement, insulated mezzanine, attic are written in capital letters of the Russian alphabet of the main building in which they are located, with the addition of the digital value of their number in the inventory order: A1, A2 or B4, B5, etc.

Annex called the part of the building located outside the contour of its main outer walls, is auxiliary in relation to the building and has one (or more) common main wall with it. Most of the outbuildings have internal communication with the main building. These should include: attached kitchens, residential extensions, canopies, vestibules, verandas, etc.

Basement- floor when the floor of the premises is lower than the planning mark of the earth by more than half the height of the room.

Ground floor- a floor at the level of the floor of the premises below the planning level of the ground to a height of not more than half the height of the premises.

Floor technical- a floor for the placement of engineering equipment and laying communications; can be located in the lower (technical underground), upper (technical attic), or in the middle parts of the building.

Mezzanine- a superstructure that rises above the common roof of a residential building, which is smaller in area than the underlying floor.

Attic- a floor in the attic space, the facade of which is completely or partially formed by the surface (surfaces) of an inclined or sloping roof, while the line of intersection of the roof plane and the facade should be at a height of no more than 1.5 m from the floor level of the attic floor.

Tambour- a passage space between doors that serves to protect against the penetration of cold air, smoke and odors at the entrance to a building, stairwell or other premises.

cold annex are written with a capital letter G with the addition of a digital designation of the number in the order of the inventory: G1, G2, etc.

Gates, fences and yard paving are written in Roman numerals: I, II, III

When shooting descriptions of unheated outbuildings and service buildings, the design and material of the foundation, walls, partitions, ceilings, roofs, floors, openings, the nature of the finish, the presence of electric lighting in a volume sufficient to distinguish one object from another are indicated.

The shooting description of courtyard structures is limited to indicating their presence. So, for tilings, the description can be carried out according to three characteristics: covering, base and underlying layer. If the structures or parts thereof are not available for inspection, then a special entry is made in the outline

The results of the field survey are recorded in the outline and field logs.

Redrawing the outline in office conditions is not allowed. An outline can be drawn up for several land plots that are part of the filming area, or for each individual plot.

The presence of a basement under the main structure or ground floor is shown in the outline as a dotted line along the contour of the walls where it is located.

The presence of an attic above the main structure is shown by a dotted line and the name of the superstructure is inscribed.

In the outline for the land plot, the number of storeys, the material of the walls and the purpose of the main building are abbreviated (for example, 2KN - two-story stone non-residential). For cold outbuildings and service buildings, these designations should not be given. The outline contains the name of the lands of the site (yard, vegetable garden, garden), tilings (asphalt, soil, etc.).

The shooting description is done in the margins or on the reverse side of the outline.

The plan is drawn on a scale of 1:500 in the conventions used in technical accounting.

The plan is oriented on the sheet along the meridian with the south side along the bottom edge of the sheet.

Physical boundaries are drawn with a solid line, conditional - with a dotted line. The plan indicates the names of streets and driveways, dimensions, heights and address numbers of buildings. The material, number of storeys and purpose of buildings is reflected in abbreviated form (for example, 5КЖ).

An explication of buildings and structures that are part of the inventory object is drawn up to the plan, reflecting their purpose.

The drawing should be oriented with an arrow to the cardinal points.

According to the plan of the land plot and the results of measurements in kind, the total area and areas under construction, paving, lands, and green spaces are determined.

The current inventory of the land plot of the household is carried out in order to identify the changes that have taken place and reflect them in the technical passports.

The following changes are subject to accounting:

  • changes in the boundaries and area of ​​the land plot;
  • erection, restoration, superstructure, reconstruction and demolition of buildings and structures.

After the construction of the house, whether it is private or multi-storey, it is assigned a police address. The address includes the name of the street (lane, square) on which the building is located and a number, which includes not only numbers, but also letters.

A letter is a letter designation of houses and buildings for technical documentation for each knowledge. The corresponding letter is not written in the address, it is contained on the first page of the technical passport.

What do additional signs mean?

There are certain rules for assigning digital and alphabetic designations.

  1. The constructed building between the existing houses, numbered alternately, will add a letter in the address (A, B and further alphabetically).
  2. If the house does not have direct access to the street, it is obscured by other houses, then its address plate will be supplemented by the building number (Lenina house 25 building 2).
  3. Buildings denote several buildings located side by side on the same site with a single entrance to it. Most often this applies to industrial complexes. The main number one for all facilities of the complex.

Letter or letter?

Internet users on real estate forums are interested in the question of how to write the word "letter" or "letter" correctly. The correct answer is letter.

What are letters for?

All objects located on the site are subject to literature. The letters are arranged in the following order:

  • The main buildings, structures are assigned capital letters (in alphabetical order, excluding "G").
  • Parts of buildings tied to the main ones: extensions, basements, attics to letter designations numbers are assigned (A1, B3).
  • An annex that does not have heating (veranda, vestibule, utility room) is written in lowercase characters (a1, b2).
  • Service buildings are designated by the letter "G".
  • Fences, fences are designated in the form of Roman numerals: I, II, IV.

Legislatively

The definition of this symbol "Instructions on the conduct of the housing stock in the Russian Federation

This time we will start the review with a fortification plan. The defensive barracks of the letters Zh-Z is a barracks for the garrison, connected by a corridor with a casemated exit to the top of the defensive embankment, which, according to the project, was supposed to have a triangular shape. Now this mound is almost completely absent. On the section A-A half shown appearance(facade) of the fortification and half of its longitudinal section, as well as sections B-B and C-C, reflecting the structure of the casemated exit to the embankment with stairs in it. The level of the floor increased after the war and several thin partitions of the same time are not reflected in the drawings and sections.

This time we will start the review with a fortification plan. The defensive barracks of the letters Zh-Z is a barracks for the garrison, connected by a corridor with a casemated exit to the top of the defensive embankment, which, according to the project, was supposed to have a triangular shape. Now this mound is almost completely absent. Section A-A shows half of the appearance (facade) of the fortification and half of its longitudinal section, as well as sections B-B and C-C, reflecting the structure of the casemated exit to the embankment with stairs in it. The level of the floor increased after the war and several thin partitions of the same time are not reflected in the drawings and sections.

The barracks is located near the railway line Brest - Vlodava, not far east of the village of Gershony. Erected in 1914-15. The fort was built according to the same standard project, as the defensive barracks of letters A-B (in fact, it is its reduced and weaker protected version).

The barracks is located near the railway line Brest - Vlodava, not far east of the village of Gershony. Erected in 1914-15. The fortification was built according to the same standard project as the defensive barracks of letters A-B (in fact, it is its reduced and weaker protected version).

East wing of the barracks.

East wing of the barracks.

Entrance to the far left casemate.

Entrance to the far left casemate.

Armored shutter.

Armored shutter.

Inscriptions from the 1930s and 40s Then the barracks served as an army warehouse.

Inscriptions from the 1930s and 40s Then the barracks served as an army warehouse.

The interior of the extreme right casemate. Until the summer of 2002, the army warehouse of the tank unit was located at the defensive barracks of the letters Zh-Z, so it is relatively slightly clogged and is in excellent condition.

The interior of the extreme right casemate. Until the summer of 2002, the army warehouse of the tank unit was located at the defensive barracks of the letters Zh-Z, so it is relatively slightly clogged and is in excellent condition.

The preserved armored door, covered with a draft.

The preserved armored door, covered with a draft.

Armored doors of the second entrance to the barracks.

Armored doors of the second entrance to the barracks.

She's on the inside.

She's on the inside.

Medium, intermediate casemate.

Medium, intermediate casemate.

One of the two central casemates. On the back wall there is an inscription from the times of the war.

One of the two central casemates. On the back wall there is an inscription from the times of the war.

Loopholes, from which they could fire along the rear wall of the fortification.

Loopholes, from which they could fire along the rear wall of the fortification.