Projects of one-story rectangular houses. Package "Comfortable home". Connection of kitchen, dining room and living room

Hello! Question to professionals about the project one-story house w3-65. We want to purchase the project, but there are doubts: 1. Is it possible to build this house on the basis of a wooden frame from sip panels (Canadian house) and finish it with siding.? 2. The construction price you quoted is quite low, although we understand that this is just a guideline, nevertheless how economical (or not?) this project is in its essence. 3. Perhaps this is the most important question: in your opinion, it is possible to build such a house on a southern slope where the height difference is more than 3 percent, but definitely not more than 10. Well, if possible, please write: it looks like the project provides for a sauna?! This is not in the description, but we ourselves suspect that room 2.3 and behind the toilet is a sauna? You acknowledge flax in advance for the answer.

administrator | 25.09.2014 14:06:02

Hello Marina! I hope I understood everything correctly, I answer. Construction: I am sure that it is possible to build a house of a similar plan using the technology you specified. Price: there is nothing specific about the increase in the cost of construction in this house and the indicated cost corresponds to the volume of this house. Slope: of course, it can be built, the question is that the foundation provided in the standard project is not suitable for your area and the same height difference, so more accurate data will be needed and, most likely, its completion. Sauna: this is a technical room, in this documentation the sauna is not designed, the room is simply left. Eventually- I see no reason to buy a standard project in order to redo such volumes of the building structure. I am inclined to assume that it will be easier and more reliable to immediately contact a company that builds houses using the specified technology and designs them itself. Save both money and time, although no one has canceled a careful choice of a company.

Marina | 07/14/2016 18:38:37

Thanks for the detailed answer!

Alex | 07/14/2016 18:40:04

Hello, I have a question about heating. How is it carried out?

administrator | 11/11/2014 11:28:51 AM

Good afternoon, Alexey! The gas boiler, in accordance with the project documentation, is located in the kitchen. Further according to the standard scheme - radiators in the rooms.

Alex | 07/14/2016 18:41:28

Hello! Thanks for the answer. There is no gas, is it possible to correct the project for a solid fuel boiler.

administrator | 11/13/2014 09:21:43

Almost any changes can be made to the project, the only question is the cost and timing of such improvements. To clarify the cost of improvements and the timing of their introduction, please write a request with your wishes for changing the project of this cottage.

guest | 07/14/2016 18:42:52

Sorry, the area of the project on the outer walls is not clear. Namely, they will be counted that way, and not by gender. Could you please inform.

administrator | 12/28/2014 19:16:53

Hello, the building area for this cottage project is 83.7 sq.m

Adam | 07/14/2016 18:44:33

Hello!
Is it possible to build this project from expanded clay blocks?
Thank you!

administrator | 03/09/2015 19:47:11

Hello Adam! Subject to making appropriate changes to the cottage project you are considering, you can. To estimate the cost and timing of these changes, you can send a request to

Elena | 07/14/2016 18:46:00

Good day! Interested in the project of the house w3-65. Is it possible to build from profiled timber? How many cubes are required for construction? And is it possible to adapt this project for a bath?
Thanks in advance!

administrator | 04/06/2015 08:49:50

Hello, Elena! When changing the functionality of this building to a bathhouse and building from profiled timber, it will be necessary to make a significant number of changes to the project, but all this can be done. The cubature will be known after making appropriate changes to the documentation.

Ludmila | 07/14/2016 18:47:19

Hello. I am interested in the price of the project W3-65 (Z16) according to Canadian technology for fine finishing (what is included in the price during construction), what is the best way to heat such a house? What area is needed for a one-story house in acres of land? Thank you.

administrator | 04/09/2015 12:29:33

Hello Lyudmila! Canadian technology This is a frame building. Under the frame, you need to prepare a new project, you will not be able to use the drawings of the current one. To answer the rest of the questions you need clarification, please send a request to and our manager will contact you to clarify the details.

Vasily | 09/13/2016 19:32:19

Good day! 1. Is it possible to “move” the right wall a meter a little, so that the bathroom and living room become larger? 2. Is it possible to use an electric boiler? 3. Is it possible to build from cellular concrete blocks? 4. Is it included engineering Communication to the project?
Thank you!

For all its simplicity, such projects of houses and cottages make it possible to realize a variety of architectural designs and layouts without frills. Moreover, among them you will not find two identical ones. The first question you will have to face is whether to purchase a ready-made project or order individual documentation. Each of the options has its own advantages and disadvantages. So, typical construction is good for its thoughtfulness, since each project has been perfected and brought to life more than once. In addition, such a project will cost you less. However, the individual, in turn, is good because it provides for all your needs, as it was created specifically for you.

One way or another, you can hardly manage on your own. Square projects two-storey houses, like any other, should be created by a professional, or rather, by several professionals at once. In this case, all the subtleties will be taken into account, allowing you to ultimately build a comfortable, safe and attractive home. But when trying to draw up documentation on your own, there is a high probability of making a mistake - for example, building a building with too wide corridors that steal the usable area from the rooms, or not calculating the thickness of the bearing walls. Correcting these and other similar shortcomings will be very difficult (and expensive).

The right choice of layout

This factor is very important, it largely depends on how comfortable your stay in the house will be. Typical house designs provide for a variety of layouts for the future home. For example, many families prefer studios where the number of partitions is kept to a minimum and the spaces flow from one to another. This type is especially good for small houses.

Projects of square two-story houses for a small family, as a rule, include a kitchen combined with a dining room, a boiler room and a living room on the ground floor, on the second - a sleeping area consisting of two or three bedrooms. Bathrooms are located on both floors. The main rule here is that common rooms are located closer to the entrance, while bedrooms are as far away from it as possible. Often Vacation home provide a swimming pool or sauna, gym or billiards. The best place for this would be the basement. True, this will increase the cost of construction.

If you order individual design of houses, you are interested in what is included in the project. It should include:

foundation plan,
facade picture,
room plans,
construction plans,
roofing design,
drawings of each floor,
explanatory note created by the architect.

Important! The windows of living rooms should face south or southeast. Projects of square two-story houses with a large number of windows on the bright side help to save money in winter by reducing heat loss.

Before starting construction of a residential building, it is necessary to draw up project documentation. The project is carefully prepared by professionals, it should include useful data that may be useful in the process of building a house.

The project of a one-story rectangular house

The document contains complete information about, the layout of communications. The document must be drawn up correctly and logically, with complete content. The project, drawn up by professionals, serves as a guarantee of a comfortable stay for the owners in their home. Ideally, the project should in reality embody all the ideas of the owners about their future home. Often, projects of rectangular houses and cottages do not differ in any way from any other options for building private housing of a more complex shape. In any case, the choice of the shape of the house, its silhouette is a creative design approach, and in this case everything is decided on an individual basis.

When choosing the configuration of a future home, it is undesirable to order building projects of a complex polygonal shape. This is due to considerations of better preservation of warm air in the living room. At present, the question of how much money the owner of the house will spend on heating it is far from being idle. In addition, there are a number of advantages in favor of choosing the layout of rectangular houses:

First of all, it classic project a simple rectangular house of a not very elongated shape allows you to reduce the cost not only for expenses and construction, but also for heating the future building.
Projects of rectangular houses are the most economical: the construction of such a house requires less financial resources.
Possibility of engineering error when compiling project documentation of a simple rectangular house is negligible, because cottages of this shape are constantly being built. Many construction organizations have long learned to accurately build rectangular buildings.

Rectangular houses have one significant drawback. The rectangular elongated shape of the house increases the area of contact of the outer walls in relation to the internal volume of the room. It is for this reason that a rectangular house requires more energy costs than, for example, a square-shaped house. However, this disadvantage is successfully compensated by the increased thickness of the wall masonry.

Components of a standard project

When developing a project, special construction organizations Documentation should consist of three components:

The architectural section contains drawings and diagrams interior spaces building. The drawings indicate not only the location of rooms and corridors, windows and doors, but also the location of the ventilation shaft, the height of the floors. The section describes in detail the layout of each floor of the building.
The structural section contains general data, namely, the layout of the foundation of stairs and passages, a description of the specifics of building materials.
Engineering section. It indicates the location of the engineering and communication systems of the building, compiled detailed diagrams sewerage, water supply, drawings of the heating system, location of electrical and telephone networks. It also describes recommendations for connecting plumbing and electrical appliances.

Building project types

Depending on what kind of house you want to build, you should choose the type of project. , sketch and customized.

Sample project

A typical project is a fully prepared document, which is a ready-made set of diagrams and drawings with explanatory notes to them and a pre-compiled cost estimate. All standard projects are created according to the same plan and therefore are very similar to each other. They have both advantages and disadvantages.

Advantages

Low cost.
Reliability proven by time.
No need to order a project for several weeks, you can buy it immediately, and thus save time on construction.

Flaws

A typical project does not always correspond to the area on which the house will be built.
There is no possibility to add or change anything in the drawing.

Projects of rectangular houses are a common option for private suburban housing. They fit well into any landscape, combining a simple external geometry with a reliable load-bearing structure, comfortable internal organization and attractive design.

Ready-made project of a rectangular two-story house

Mansion with a total area of 700 sq. m is made of two levels of brick and designed in the style of modern classical architecture. The appearance is strict, concise, yet majestic. The leading methods of spatial and artistic organization are symmetry and proportionality.

Characteristic features of the exterior:

The main façade is punctuated by a high colonnade that forms galleries on each floor on either side of the main entrance. The main entrance group is decorated with a bay window, a wide staircase leads to it. The entrance door is decorated with a neat triangular pediment on graceful brackets.
The foundation of a private rectangular house is lined with dark gray stone, and the walls are lighter in color and trimmed along the lower perimeter with embossed rusticated masonry. Along with the protruding interfloor and crowning cornices, this technique creates a horizontal division of the facade, characteristic of ancient architecture.
The central part of the rear façade is highlighted by round columns and square semi-columns, which frame the entrance area symmetrically. According to the project, the house has four entrances - this is done for easy access from any side. The side entrances are made in the form of bay windows and are decorated identically.

The luxurious mansion is designed in neutral gray tones, light walls are combined with a darker plinth and a metal roof. Such a palette will fit well into the natural environment of a suburban area. A warm shade is introduced by brown window frames and front doors. A beautiful contrasting element is the black forged railings of the galleries. The combination of color with discreet façade decor gives the elite project a complete look.

Rectangular private houses: architectural advantages

Modern rectangular cottages have the following advantages:

In such projects, the construction of the foundation and floors does not require the use of complex constructive solutions. Standard building construction successfully tested by many years of experience, reliable and durable due to the uniform load on the foundation. The risk of engineering errors is reduced to zero.
The rectangular country house has good energy efficiency characteristics. The walls are easily insulated, the wind load of the building is reduced as much as possible. Due to the optimal ratio of the area of the outer walls and the internal volume, the costs of heating and air conditioning are reduced.
The correct geometric shape is universal and suitable for the implementation of various architectural concepts: the facade is decorated in the style of classics, empire, minimalism, hi-tech, etc., you can attach a garage, terraces to the building, equip an attic or ground floor. The internal layout provides for a wide range of residential and utility rooms, their layout.
The roofs of rectangular houses usually have a four-slope or gable configuration. The original solution with a flat roof increases the usable area of the project, because. an additional exploitable surface appears, for example, for a terrace.
Such cottages fit perfectly into land plots that are simple in geometry.

Features of the layout in a rectangular two-story house

The central difference from one-story buildings is in the logical and comfortable division of the premises of the day and night zones into two levels:

The first floor is traditionally intended for the public part: there is a hall, a living room, a dining room, a kitchen, a winter garden, a library. Utility rooms are located separately: a boiler room, a pantry, a laundry room, a SPA zone (during their design, it is taken into account that the noise from the equipment should not interfere with residents).
On the second floor, bedrooms and bathrooms in the required quantity, children's rooms are equipped. If there are elderly people in the family, rooms below are arranged for them to eliminate the risk of injury. Guest bedrooms can be located both on the second and on the first level (at the request of the owners).
Bathrooms are designed within walking distance from residential areas, but at the same time, the entrance to them should not be visible from the living room or other public place. The lower bathroom usually has a guest character (there is a shower, a toilet bowl, a sink, an optimal set of bath accessories). Upstairs bathrooms are larger and more individually furnished.
AT two-story house rectangular shape necessarily present stairs. Its design depends on the interior style. Location options: in the hall or living room. In elite projects, there may be several stairs.
Another planning feature is the availability of dressing rooms on each floor. Upstairs, they are adjacent to the bedrooms and are the main place for storing personal belongings, and below they are included in the entrance group and are designed to store used outerwear and shoes.

Projects of rectangular houses

In modern country cottages of this form, popular architectural solutions are easily implemented. They increase the comfort of living and improve appearance building.

Rectangular house with attic

This is a practical idea for those who do not want to build a full-fledged floor and agree to the arrangement living space under the roof. The roof can have a double slope or a more complex design, attic glazing provides natural light. Here you can place a bedroom, a children's playroom, an office or a creative workshop.
In the project of a rectangular cottage with an attic, implemented in the Moscow Region, the original design of the roof became the central accent of the facade.

Rectangular house with garage

This is a way to rationally use the area of \u200b\u200bthe site, because. the machine does not need to build a separate building. It is convenient to use the combined room, especially when it's cold (you don't have to go outside to get into the car), here you can store household items that are required from time to time.

Location options:

in the basement - the most profitable option during the construction of a cottage on a plot with a slope;
in the elevated base of the cottage, then the residential levels are located above it;
from the end facade (the advantage of the solution is the possibility of an extension to an already finished building, while the first two are initially included in the architectural plan).

In each project of a rectangular house with a garage, reliable heat and sound insulation between these zones is provided. It is necessary so that the cold air from the garage does not penetrate into neighboring rooms, and the sound from a running engine does not interfere with the rest of the household.

Rectangular cottages with a veranda

Most often, the veranda is attached on the ground floor - on the front, side or rear facade of the building. This is not only an additional resting place, but also a way to decorate the exterior with beautiful racks, panoramic windows. They use the veranda for a summer living room, kitchen, chill-out area, billiard room, etc.

Placement methods:

open area adjacent to the facade;
two-level arrangement - at the bottom there is a glazed room, at the top there is an open area with its own staircase;
an extension with the ability to enter the inner chambers directly from the street.

Facade of a rectangular house: design examples

In classical architectural styles, it is customary to emphasize the symmetry and proportionality of the building. To do this, emphasis is placed on constructive facade lines - with the help of white pilasters, columns and semi-columns, rustic stones at the corners, porticos, bay windows.

Window and door openings have an elongated or arched shape, the architraves are distinguished by pediments and sandriks. The outer walls are decorated with reliefs, stucco, sculpture, elements of the order system. All together creates a traditional, neat, harmonious exterior, based on centuries-old architectural canons.

A rectangular-shaped cottage in modern styles is distinguished by an almost complete absence of decor, a large glazing area, and a free combination of facing materials (plaster, wood, stone, concrete, ventilated structures). A well-designed evening lighting, which gives the facade an additional relief, acts as an expressive element.

Rectangular brick houses fit equally well into the concept of classic and modern buildings. This is a solid and aesthetically attractive facing material, due to the variety of shapes, textures and colors with excellent opportunities for design. A fashionable and expensive version of the facade is a crossbar brick finish (narrower and longer than the standard one).

To universal solutions also applies to stone cladding made of natural granite, limestone, shell rock, sandstone, Dagestan stone, as well as their skillful imitation. Rectangular brick or stone buildings are the traditional choice for suburban housing.

Our portfolio includes finished projects rectangular houses and cottages in classical and modern style, with an area of 300 sq. m, one-, two- or three-level, with an attic, garage, veranda, swimming pool or without them.

You can order an individual project of the desired number of storeys and layout from us.