As an example of practical, comfortable and reliable housing, Canadian homes have earned prestige around the world. With proper insulation, they are able to maintain a comfortable indoor temperature in any cold months, even if severe Russian frosts have come.
Over the decades, house designs using Canadian technology have become even more advanced. Today it is the perfect combination of lightness and strength. And in view of the increasing popularity of cottage settlements, prefabricated houses using Canadian technology have become increasingly built in our country.
To understand why it is worth choosing “frameworks”, it is worth considering their features and advantages. It is a mistake to believe that quality should be expensive, because the prices for prefabricated houses using Canadian technology indicate the opposite. Such an undoubted plus is caused by an optimized and well-calculated constructive project- no extra building materials for the future, no additional costs for unscheduled deliveries, no protracted terms of work. A Canadian home is fast, warm, comfortable and reliable!
House prices
The totality of all the advantages of Canadian houses suggests that North American residents with their harsh climate, like no one else, know a lot about construction. With minimal financial and time costs for the construction of frame country houses, cottages and mansions, their service life is not inferior to stone houses. You will receive comfortable, reliable and quality accommodation in as soon as possible if you order turnkey prefabricated houses using Canadian technology.
For true connoisseurs of the best!
Frame houses based on Canadian technology have one significant difference - thermal efficiency. This gives a huge advantage to the owners - savings on heating! To warm up the house in winter, you do not have to heat for hours, wait for the walls to warm up and only then the air. Plus, the prices for turnkey Canadian houses are much lower than for houses made of foam or gas blocks. And the interior decoration in such houses can be done immediately after construction is completed, without waiting for the shrinkage time to pass, as with timber or log houses.
Projects of houses based on Canadian technology surprise with a variety of architectural solutions. BUT individual design makes it possible to realize any of your dreams - if you like a cottage, you have a drawing or even a sketch of a house, it can be done using frame technology.
Advantages of Canadian panel houses from Mechtaevo:
"Mechtaevo" - we vouch for the quality!
Due to its reliability, practicality and affordable prices, focused on the domestic consumer, frame houses based on Canadian technology are gaining more and more popularity in Russia. But who should be entrusted with the implementation of the project and construction of your Canadian home, and by what criteria should you choose a company that will take care of these issues? After all, one possession of Canadian construction technology is not enough. Depending on how high-quality materials the company uses, how reliable its suppliers are, how professional and responsible the teams are, your house will last for so long.
You can be absolutely sure that the house from Mechtaevo will meet all the stated requirements of quality and reliability. This is confirmed by many years of rich experience in the design and construction of Canadian frame houses turnkey and grateful customer reviews. By choosing a Canadian technology house in our company, you will receive everything you need to live and relax in your home. Our customers always receive a multi-stage quality control system construction works- your object will be controlled by a foreman and a technical supervision service. Your Canadian home will be exactly what you dreamed of!
With options for finished projects with all the layouts of the rooms you can find on our website. Detailed information about prefabricated Canadian houses, organizational issues, prices for the delivery of building materials, credit and installment options, check with the company's managers.
When cooperating with us, customers invariably receive a number of additional benefits. In particular, the five-year warranty covers the entire range of services.
Currently, there are a lot of modern technologies used in construction. But building turnkey frame houses is still the most profitable. The final cost of the house project is settled by all clients who do not plan to spend much Money, a long time to wait for their introduction. It should be taken into account that the construction of turnkey frame houses makes it possible to do a complete finish immediately after the erection of walls and roofs, since the buildings do not shrink, which means that you do not have to wait for the terms of your settlement for several years.
A unique Canadian technology for the construction of frame houses, the price of which is also considered the most affordable of all available options. technological construction, allows you to save money and not give up on additional cubic capacity, which will cost several times cheaper than, for example, the same area during brick construction. We will carry out the installation of the house, taking into account all the norms and requirements that apply in modern construction. Intel Group specialists have extensive experience in providing such services. At present, it is possible to build a turnkey frame house using Canadian technology with additional discounts by share.
The most affordable price for a frame house using Canadian turnkey technology will allow you to solve the housing issue in a short time, and not postpone it indefinitely. The practical technology for building a turnkey house according to the Canadian system was developed taking into account the peculiarities of the climatic conditions of Russia. The frame house will be warm even in regions with harsh conditions, for example, in the Far North, such buildings have proven themselves even in cold winters.
Millions of owners have already evaluated Canadian houses, who were satisfied with all the conditions of construction, payment, and most importantly, they received comfortable, modern, warm and cozy housing. Our prices for the construction of turnkey Canadian frame houses will suit the most demanding client.
Initially, you need to order a foundation for the construction of houses using frame technology according to the selected project. Features of the construction technology of prefabricated houses make it possible to make lightweight pile foundations. This, in turn, is a guarantee that all work will be completed in minimum terms, the cost of the foundation itself will be 30-50 percent lower than when using traditional technologies.
Accordingly, the price frame construction at home is immediately reduced to the zero stage. Only Canadian technology for the construction of frame houses, the price of which has been reduced, allows you to get significant savings, which is why such options are increasingly being chosen by citizens who have dreamed of their own housing for a long time, but for one reason or another did not dare to start construction.
The quick execution of house projects in the Intel Group company is carried out by highly professional engineers who always take into account the main requirements of the client. If necessary, you can opt for standard developments. Only we provide services in the construction of a house at the most affordable prices, if we compare the prices of companies in Moscow or other large Russian cities.
You can find out what the price of a turnkey frame house using Canadian technology is on our website or at the company's office during a personal visit. We will build a house quickly, we will conclude an official cooperation agreement with each client who applied to our company. The catalog contains a large selection of standard designs. And this means that we will build a house according to individual drawings or finished project, which has already been tested and developed taking into account all the wishes of our customers. The price of the house will suit you completely.
It appeared back in the 17th century, but changed over time, as new, more versatile building materials appeared.
Project of a house with a veranda, made according to Canadian construction technology
Today offer a large number of different design, stylistic design. There are developments and buildings resembling a mansion. . Depending on the design, used exterior finishing materials, they are given the appearance of any style: from classic to minimalism.
The principle of building skeletons has been preserved since the 17th century. Wall filling has undergone a significant change due to the advent of new materials.
Initially, in Canada, America, a multilayer tree (plywood) was used as a bearing wall material.
Now it has been replaced by an orientation strand board, known by the acronym OSB.
Scheme of the device of a two-story building, made according to Canadian technology As heaters, mineral materials, polystyrene, expanded polystyrene are used, which replaced the compacted straw, grain waste.
consist of the following elements:
The low thermal conductivity of the materials ensures minimal losses. Small specific gravity structural elements reduces the load on.
Project of a house with an attic and a balcony Buildings can be installed on a lightweight structure, which reduces the cost.
The main conditions for the construction of the frame - low moisture content of the tree. material with a high degree humidity dries out, deforms, which leads to a violation of the integrity of the geometry of the structure.
The process of building a house from SIP panels By specifications a house using Canadian technology is built only from dry wood with a moisture content of less than 20%. Under natural conditions, the drying process lasts from several months to a year, depending on the breed. It is stored, making gaskets from bars, for air circulation.
Under conditions of forced drying, the process is faster. Wood is first machined.
Read also
Houses from calibrated logs
Drawing of a building from panels on a columnar foundation They are kept under natural conditions for 10–14 days, then they are kept in drying chambers for two weeks. Such wood is more expensive by an average of 25%, but it is a reliable building material.
All elements of wooden structures are impregnated with flame retardants to protect against fire. Antiseptics preventing the formation of fungus, mold, the appearance of wood-boring insects.
The process of building the second floor of the cottage Filling slabs of the frame are manufactured at factories, ready-made blocks are mounted already at the facility.
There are three building methods:
When building a house, all components of the technology for erecting a frame building must be observed. The building will last long term, if the "pie" of the panels is correctly assembled.
It consists of the following layers:
For certain types exterior finish ventilation is required.
The advantages of frameworks include high performance thermal insulation (from 0.03 to 0.05 W \ mGrads), affordable price (within $ 200 per sq. M.). Buildings are erected within 2-3 weeks.
The benefits also include:
These qualities make frame technology one of the leaders in the construction segment.
Watch a video review of house projects built using Canadian technology.
Design is the first stage in the construction of houses using Canadian technology. Can be taken standard project, adapting it to the specific conditions of the site, personal wishes.
The project of a one-story frame house Construction stages:
Scheme of the device frame wall 
Foundation binding structure
Rack installation process
Dimensional drawing of the frame wall device
Frame structure overlapping devices
The process of installing the roof of a frame house
When the frame is ready, SIP panels are mounted to it. The wiring is laid inside the frame in a corrugated sleeve. Communications are installed there.
Due to the speed of construction, country houses according to Canadian technology are widely in demand in the suburban real estate market, especially since it is enough to simply order them on a turnkey basis. This construction method is very common in Canada, which gave the houses built using this technology their name. Well, since the climatic conditions of Canada are close to domestic, the methods developed and tested in this country for the construction of suburban housing are relevant for Russian buyers. What can Canadian technology houses look like: projects, prices, photos in our article.
A small frame house built using Canadian technology Source karkas-nsk.ru
The first frame buildings were known in Europe during the early Middle Ages. In those days, the structure was based on a system of posts and beams with braces arranged diagonally. The space between the parts of this frame structure was filled with stone, bricks or clay.
The colonists who came to Canada and the United States from Europe used this technology, which allows them to create houses at any time of the year in a short time. To protect against the harsh weather conditions of Canada, the walls of the houses were sheathed with boards on the outside and inside, and the voids were filled with any available material. Most often, a mixture of clay, straw, sand and stone was used.
Houses in old European cities are "distant ancestors" of modern frame technology Source nkkconsult.ru
Thus, the basis for the creation of houses using Canadian technology already at that time was the prototype of insulated panels, with the help of which it was possible to build a high-quality warm house in the shortest possible time. The modern technology of "Canadian houses", adapted for harsh climatic conditions, has a number of advantages and disadvantages.
A frame house using this technology is built from panels sheathed with OSB (a material made from wood chips impregnated with polymer resins) and insulated with expanded polystyrene. The dimensions of the panels are selected individually, taking into account the dimensions of the finished building. Insulated panels are prefabricated wall elements that are fixed on a pre-built foundation. After that, the installation of floors, roofs, as well as doors and windows.
Facing brick in the design of a frame house Source karkasblog.ru
Unlike dwellings made of beams or logs, Canadian wooden houses allow installation engineering communications within the panels themselves. Thus, finished living spaces look more aesthetically pleasing, and installation takes less time and effort.
More about the advantages of Canadian houses in the video:
Despite the many obvious advantages, Canadian technology houses have a number of features and limitations, due to which they are not suitable for all owners of suburban areas. The main feature of the technology is the restrictions on the dimensions of the finished building. The height of each floor should not exceed 3 meters, a maximum of 3.
The compactness of Canadian houses does not affect their functionality and pleasant appearance. Source avantage-dom.ru
The environmental friendliness of the finished building may raise questions due to the abundance of polymer resins impregnating the product. However, this is a matter of the integrity of the manufacturers of such structures - if the panels are made in compliance with the technology, then they comply with all environmental safety standards.
The characteristics of the finished residential building, in addition to the quality of the material, are also determined by the professionalism of the team of workers. If the conscientiousness of the contractor is combined with high-quality components and finishing in accordance with all the rules, then a Canadian house is a comfortable and durable home.
Regardless of the technology chosen, the construction of a house using Canadian technology will be carried out in several stages. When choosing a material for each of the elements, it is necessary to take into account its functional characteristics.
A common option for the construction of frame structures - strip foundation, which is a concrete structure immersed in the ground by about 50 cm, the height above the ground is 20-30 cm. With correct calculations, the strip foundation allows you to build a residential building on various types of soils, including swampy and mobile. The main disadvantage of such a foundation is the inability to eventually make a global redevelopment of the house.
Ready strip-column foundation "in section" Source emupauto.ru
Screw foundations can sink to a considerable depth, which makes it possible to use them to create a foundation for a house on difficult soils. The main disadvantage is that a noticeable shrinkage of the structure is likely, especially with errors in calculations or a violation of technology. As a result, with a fine finish after the completion of construction work, it will take some time to wait. In addition, neither about the basement, nor about ground floor in such a house it is not necessary to think.
Screw foundation made of metal piles Source 72.ru
The most reliable option is a slab foundation, which is a flat reinforced concrete "cushion" on which the structure is being built. Due to its high cost, it is usually not used when building prefabricated houses using Canadian technology, but on sandstone or with an abundance of groundwater, this may be the only option.
Schematic diagram of creating a slab foundation Source profundamenti.ru
Most often, the cost of the foundation is calculated separately from other works on the construction of a frame house. Experienced specialists will help the customer to choose the optimal type of foundation, depending on the features of the building and the surface on which it will be built.
At the heart of the future floor are floors from wooden beams, which are located on the foundation of the house. Most often, custom-made slabs are used for covering the ground floor along with materials for the walls of the house. Installation of this part of the house is carried out immediately after the preparation of the foundation, the joints of the plates are carefully treated with sealant. The next layer is insulation and vapor barrier materials. After that, on the finished "rough" floor is placed finishing coating such as laminate.
Draft floor with insulation, prepared for fine finishing Source indigostroy.com
The floor on the second and third floors is built in the same way, while the amount of insulation and vapor barrier material used is less than for covering the first floor. Soundproofing materials that provide comfortable living come to the fore here.
The basis of the construction on the second floor is the floors on which the subfloor is located, insulating materials, slabs and fine finishes (for example, linoleum).
Regardless architectural project, Canadian frame houses are based on SIP panels, which are particle boards with a layer of insulation. As a rule, such elements are installed without an additional frame, but at the request of the customer, the house can be further strengthened.
Appearance of high-quality SIP panels in a warehouse Source sipanel174.ru
If necessary, heat-insulating plates made of mineral wool are added between the frame elements.
Outside, the walls are covered with a film to protect against the penetration of moisture and wind.
The construction of houses using Canadian technology involves the use of various facing materials: siding, facade panels made of composite materials, porcelain stoneware and stone tiles, plaster or wooden boards. At the same time, depending on the option chosen, the facing materials will be attached to the surface of the walls in different ways.
Modern materials help create any exterior finish Source mastersmi.com
Regardless of the type of finish chosen, ventilation gaps must be taken into account, which help free air circulation and prevent the accumulation of moisture. Thus, the final thickness of the walls consists of the panel, interior and exterior finishes, as well as the technological gap.
The chosen form and materials for the roof of the house entirely depend on the amount of precipitation, climate, and also the intensity of the winds.
The main material for the roof is SIP panels placed on wooden rafters (strong beams that form the slopes of the future roof). If necessary, additional thermal insulation is fixed on the panel.
After that, the roofing material is selected. The most common option is a metal profile - sheets of various shapes that protect the roof from external influences. For the comfort of residents, such material must be equipped with soundproofing so that the noise of rain can be heard less.
An alternative option is soft bituminous tiles, which are lighter and easier to install.
The choice of roof shape is limited by the average rainfall and the taste preferences of the customer. For example, budget houses most often have a standard gable roof. It prevents water retention, neutralizing the possibility of leaks, and also allows you to equip a spacious attic space.
Laconic house with a gable roof
Multi-pitched roofs look more original and allow complex architectural solutions to be implemented. The main disadvantage of this option is the complexity, and, as a result, the high cost of installation work.
Reliable and easy to install SIP panels, which are easy to install without additional construction equipment, allow you to create a home with your own hands.
Carpenter Larry Hohn's book and film, The Very Efficient Carpenter, describes in detail the process of building a frame house using Canadian technology. Each chapter of the book and the film series is devoted to the components of the house: the floor, the walls, the roof, as well as the independent construction of the stairs. At the beginning of the video, the process of calculating the required amount of building materials is described, the necessary tools are mentioned, and the progress of the work itself is shown in detail.
Film by Larry Hohn:
The work of the master shows that the construction of a durable building requires not only experience and skill, but also the selection of materials with the necessary technical specifications. Unfortunately, when creating a house, "there are no trifles." For example, an incorrectly created foundation or a violation of roof insulation technology leads to premature destruction of the house.
The process of building a frame house
Larry Hohn's step-by-step video guide completes the book and also walks you through the process of building a house to fully appreciate the quality of the work. construction team. This will avoid serious errors in the construction.
Any projects of Canadian houses and cottages can be built on a turnkey basis. This service is provided by qualified specialists working on approved technologies. The progress of construction should be monitored to check the quality of work, but it is better to entrust the calculation of materials and the subtleties of the process to professionals.
The general progress of construction is shown in the video:
The main mistake when building a house is inappropriate savings. SIP panels are based on wood, so it is highly recommended to pay attention to their quality. Raw, improperly dried or rotten wood - these are future gaps in the walls, drafts and the rapid destruction of the house.
All joints in the finished structure should adjoin each other as closely as possible, all gaps must be treated with sealant and construction foam. This will avoid unnecessary "cold bridges" (places of penetration of rain and wind), which contribute to the destruction of the house.
Source www.pinterest.ru
Ready-made house from SIP panels treated with sealant: the seams are tightly adjacent to each other Source tutknow.ru
Tight-fitting panels require the mandatory installation of additional ventilation, as well as the use of artificial gaps. Before starting work, you should ask the builders how exactly the ventilation of the house will be carried out.
The quality of the panels themselves, manufactured in the factory, should be checked before the installation of the building. As a rule, high-quality SIP panels have smooth edges, regular shape and uniform color. It is strongly not recommended to purchase cheap Chinese-made stoves that are not adapted to severe weather conditions.
The most common Canadian technology house projects are one-story, one-story with an attic, standard two-story, as well as houses with a garage.
Traditional cottage with an extensive porch and a gable roof - the best option for a small family. Finishing with plaster and wood panels, as well as laconic forms, create a complete look of the building. The absence of large windows and a glazed veranda will save on heating the building.
One-story house with a porch and large windows Source blog-potolok.ru
The original architecture of a one-story building with an attic is created due to the irregular shape of the windows. The gable roof used in the architectural solution prevents the accumulation of moisture and protects the roof from leaks. The glazed porch is a miniature analogue of the summer veranda.
Porch two-story house adjoins the end wall source seattlehelpers.org
The combination of a small terrace, stone and plaster finishes gives the two-story house solidity and good quality. At the same time, the architectural solution is very compact and budget: gable roof easy to install, heating costs are kept to a minimum thanks to the open porch and terrace on the second floor.
solid two-storey house with large windows and a terrace Source ekzo.by
Facing with natural stone and brick is a sure way to give an affordable and concise home exclusivity and reliability. Small skylights, originally decorated chimneys and a modest porch give the building a complete look. Organically integrated garage with small windows can be used as an outbuilding.
Two-story house with attic and built-in garage Source belarusinfo.by
Experience shows that there are moments in the construction of a house where it is absolutely not worth saving, but there are nuances where you can not only save, but rationally spend the budget (which is a kind of reasonable savings).
Canadian technology houses built by qualified specialists using high-quality materials are an excellent option for suburban housing. Ordering a turnkey frame house guarantees taking into account many technical nuances that allow you to create a durable structure. To simplify the choice, below are prices for turnkey Canadian houses from developers:
 Source tr.skopelitissa.com |
 Source dekardkarkas.ru |
 Source dekardkarkas.ru |
| 7.5x8.8 from 5.1 million rubles | 7.5x9.8 from 5.3 million rubles | 8.4x9.9 from 5.9 million rubles |
 Source dekardkarkas.ru |
 Source dekardkarkas.ru |
 Source sk-domostroi.ru |
| 8.65x9.75 from 5.3 million rubles | 8x13 from 6.4 million ₽ | 11.8x10 from 7.2 million rubles |
 Source sk-domostroi.ru |
 Source sk-domostroi.ru |
 Source vachdom.ru |
| 6x6 from 2.9 million ₽ | 6x8 from 4.2 million ₽ | 6x8 from 3.7 million ₽ |
 Source www.cottage.ru |
 Source myfeo.ru |
 Source dom-expert.by |
| 8x8 from 4.1 million ₽ | 9.5x10 from 4.9 million ₽ | 8x10 from 4.6 million ₽ |
